High Resolution Weatherproof 6mm Color CCD 480TVL Camera with 80ft Night Vision - 4 Pack
Product Model Number:QSC480304
Overview:
This 480 TV lines high-resolution camera delivers crisp and clear quality from its 1/3" Sony image sensor. The 36 Infra Red LEDs allows for nighttime visibility of approximately 80 ft. Q-See's professional CCTV cameras are designed to meet both your indoor and outdoor home and business needs and are easy to install and operate.
Product Features
| 1/3" Sony CCD image sensor |
| 6mm Lens |
| 480 TV lines resolution |
| 36 Infrared LEDs |
| 80 ft. night vision |
| Weatherproof (indoor/outdoor use) |
| Waterproof Level: IP65 |
| 60 ft. of cable included for flexible installation (cable can extend to longer distance) |
Product Specifications
| Category | Description |
|---|---|
| Synchronization | Internal |
| Image Sensor | 1/3" Sony Color CCD. |
| Lens | 6mm |
| Horizontal Resolution | 480TVL |
| Effective Pixels | 768x494 |
| Field of View | 42° |
| Connectors | BNC (F), 12VDC 2.1mm (F) |
| Minimum Illuminance | 0.5/0 (when LEDs on) Lux/F1.2 |
| Infrared LEDs/Distance | 36/80ft |
| IR LED Wavelength | 850nm |
| Video Output | 1 Vp-p75 ohm |
| Electronic Shutter Speed | 1/60 - 1/100,000 sec (NTSC) |
| Scanning System | 2:1 Interlace |
| Synchronization | Internal |
| Audio Output | None |
| S/N Ratio | >52dB |
| Gamma Characteristic | 0.45 |
| Power Supply | DC12V 1.5A |
| Operating Temperature | 14°F to 122°F (-10°C to +50°C) |
| Dimensions (WxHxD) | 81mm x 83mm x 134.5mm |
| Weight | 20.5 oz (580g) |
| Compatability | Camera plugs into DVR, VCR, TV, or Video Monitor |
Product Contents
| Qty | Description |
|---|---|
| 4 | Color Camera with CCD technology |
| 4 | 60 Ft. Cable |
| 4 | Power Adapter |
| 4 | 6 mm Lens (installed) |
| 4 | Stand included |
| 1 | Users Guide |
Product Accessories
| Model # | Description |
|---|---|
| QS50B | BNC Cable 50 Feet Video and power |
| QS100B | BNC Cable 100 Feet |
| QS59500 | RG59 Siamese Cable Video/Power - 500ft Spool |
| QS591000 | RG59 Siamese Cable Video/Power - 1000ft Spool |
Product FAQs
CCD sensors, create high-quality, low-noise images. CMOS sensors, traditionally are more susceptible to noise. Because each pixel on a CMOS sensor has several transistors located next to it, the light sensitivity of a CMOS chip tends to be lower. Many of the photons hitting the chip hit the transistors instead of the photodiode. CMOS traditionally consumes little power. Implementing a sensor in CMOS yields a low-power sensor. CCDs use a process that consumes a lot of power. CCDs consume as much as 100 times more power than an equivalent CMOS sensor. CMOS chips can be fabricated on just about any standard silicon production line, so they tend to be extremely inexpensive compared to CCD sensors. CCD sensors have been mass produced for a longer period of time, so they are more mature. They tend to have higher quality and more pixels.
This camera has a BNC female connector for video and a female 12 volt, 2.1mm power connector.
This camera can be run from as far as 200 ft. when using 60 ft or 120 ft extension cables. With one single RG59 cable, this camera can extend up to 800 ft. You can go to up 1800 ft using RG6 cable.
A fixed focal length lens cannot zoom. The focus is fixed. A fixed focal length lens usually allows more light to pass through the lens at a given focal length than a varifocal, or zoom lens. This can be important in low light situations.
The cameras themselves do not detect motion. In order to record motion you need a motion detection DVR. When power is supplied the cameras will continually send video feed through an RCA cable (wired) or through the air (wireless).
Resolution refers to the number of lines in the cameras video image. The higher the resolution, the better. Lux refers to the amount of light that is needed for the camera to see. This becomes important if you need the cameras to see in low light. The lower the Lux, the better.
Cameras have a working temperature range in between 14F to 130F. If the temperature falls below the minimum for a long period of time, it could damage the camera. The best solution for this is putting the camera in a heated enclosure.
You are not able to use an IP camera with the DVR, there is no way to get the video signal from the camera into the DVR.
You can use CAT5 cable, you would need to use video baluns to attach the cable to the camera and the DVR. If you use powered video baluns you can also send power to the cameras through the CAT5 cable.
Shipping
This item is eligible for free ground shipping within the United States. Q-See also offers expedited delivery for an additional charge. Call the Q-See Sales department toll-free number at 877-998-3440 x 537 Monday through Friday 8:30 a.m. to 5 p.m. Pacific time for a quote on your preferred shipping method.
- U.S. shipping
- FREE ground mail service
- Next Day delivery – fastest possible
- Next Day Saver
- Second-day delivery
- Three-day delivery
- Canada shipping
- $25 Flat Rate Ground
- UPS Expedited
- UPS Express
